T800 Android Basic – Fully Rugged
From: £811.25 Excl VAT
ALWAYS READY. ALWAYS RUGGED.
Built for today’s mobile workforce, the Getac T800 fully rugged tablet features an 8.1″ HD LumiBond® display for better viewing experience, the latest wireless technology, and a thin, ergonomic design which allows it to be held comfortably in one hand. The T800 provides best-in-class battery life to get you through your shift and it’s no-compromise rugged features guarantee that it will always be ready.
|Operating System:||Android 4.4 KitKat|
|Mobile Computing Platform||Intel® Atom x7-Z8700 1.6GHz, burst up to 2.40 GHz|
– 2MB Cache
|VGA Controller||Intel® HD Graphics|
|Display||8.1″ IPS TFT LCD HD (1280 x 800)|
600 nits LumiBond® 2.0 display with sunlight readable technology
|Memory||4GB LPDDR3 expandable to 8GB|
|Storage||eMMC 64GB / 128GB|
|Keyboard||6 tablet buttons (Power, Home, Programmable, Camera Capture/ Barcode Reader Trigger, Volume Up, Volume Down)|
– Capacitive multi-touch screen
– Optional dual mode touchscreen (multi-touch and digitizer)
|Expansion Slot5||Optional 1D/2D imager barcode reader, RS232, Micro SD or Etherneti|
Optional SnapBack add-on: Smart Card and contactless RFID/NFC reader comboii
Optional SnapBack add-on: 2nd expanded batteryii
Optional SnapBack add-on: Smart card and Magnetic Stripe readerii
|I/O Interfaces||FHD webcam x 1|
8M pixels auto focus rear camera x 1
USB 3.0 (9-pin) x 1
Headphone out/Mic-in Combo x 1
DC in Jack x 1
Micro HDMI x 1
Docking connector (24-pin) x 1
Optional RF antenna pass-through for GPS, WWAN and WLAN
|Communication Interface||Optional 10/100/1000 base-T Ethernet (occupies expansion slot)|
Intel® Dual Band Wireless-AC 7265, 802.11ac
Bluetooth (v4.0 class 1)
Optional dedicated GPS
Optional Gobi™ mobile broadband
|Software||Getac Utility (including Power Manager)|
Getac Barcode Manager
|Security Features||TPM 2.0|
Optional SnapBack add-on: Smart Card and contactless RFID/NFC reader comboiii
|Power||AC adapter (65W, 100-240VAC, 50 / 60Hz)|
Li-Ion battery (7.4V, 4200mAh)iv
LifeSupport™ battery swappable technology
(only with SnapBack 2nd expanded battery)
|Dimensions and Weight||227 x 151 x 24 mm|
|Rugged Features||MIL-STD-810G certified and IP65 certified|
6 feet drop resistant
Optional ANSI/ISA 12.12.01
Vibration & drop resistant
e-Mark certified for vehicle usage
– Operating: -21°C to 50°C
– Storage: -51°C to 71°C
– 95% RH , non-condensing
Multi-Bay Charger (Dual Bay)
Multi-Bay Charger (Eight Bay)
Main Battery (7.4V, 4200mAh)
Multi-Bay Expanded Battery Charger w/ adapter (Six Bay)
2nd Expanded Battery (14.4V, 2100mAh)
AC adapter (65W, 100-240VAC)
Vehicle adapter (90W, 11-16V DC and 22-32V DC)
Capacitive stylus (Hard tip)
Shoulder strap (2-point)
i Barcode reader, Serial port, Ethernet, and MicroSD port are mutually exclusive options.
ii All SnapBack add-ons are mutually exclusive options.
iii 13.56MHz Contactless RFID/NFC reader (ISO 15693, 14443 A/B, Mifare and FeliCa™ compliant).
iv Battery life testing conducted under MobileMark 2007. Battery performance will vary upon software applications, wireless settings, power management settings, LCD brightness, customized modules and environmental conditions. The battery has a limited number of charge cycles and may eventually need to be replaced by a Getac service provider. Battery life and charge cycles vary by use and settings.
v Weight varies from configurations and optional accessories.
vi Tested by a national independent third party test lab following MIL-STD-810G.